Blogs

There are certain aspects that need to be maintained regardless of whether you operate in the food packaging sector or the pharmaceutical products manufacturing industry to ensure that a quality product will be provided to the clients. Package integrity testing is required for items that must be packaged so that they can be sterilized and maintained sterile for a defined amount of time, throughout the product lifecycle.

Package Integrity Testing Using VeriPac 455

The VeriPac 455 is a non-destructive, non-invasive, and highly sensitive Container Closure Integrity Testing (CCIT) method that may be implemented into protocols at any stage of the handling process. Stability research, clinical trial investigations, quality assurance testing, and production statistical process control are examples of applications for this technology (SPC). Leak rates as low as 0.05 cc/min can be found with the VeriPac 455. Results have consistently outperformed and outperformed the dye ingress test in terms of accuracy.

The VeriPac 455 core technology is based on the ASTM vacuum decay leak test method (F2338-09) recognized by the FDA as a consensus standard for package integrity testing. This test method was developed using VeriPac leak test instruments. The VeriPac 455 is equipped with the patented PERMA-Vac dual vacuum transducer technology, which increases test sensitivity and yields reproducible, dependable results.

Additionally, the VeriPac 455 contains major improvements in networking and internet access that enable remote operation, system monitoring, and MES integration. Test systems can be built to operate automatically or manually. This inspection method is appropriate for QA/QC statistical process control and laboratory offline testing. The test cycle only lasts a few seconds, the results are objective, and the testing is non-destructive to the product and the package.

Inspection Criteria

• Measures seal integrity of entire container or package
• Measures and verifies container closure system integrity
• Tests for gas leaks for dry products (lyophilized vials, powder filled)
• Tests for liquid leaks (liquid filled vials, pre-filled syringes)

Benefits

• Non-destructive, non-subjective, no sample preparation
• Defect detection down to 0.01 cc/min
• Highest level of sensitivity, repeatability and accuracy
• Results proven superior to dye ingress
• Deterministic, quantitative test method
• Supports sustainable packaging and zero waste initiatives
• ASTM test method F2338 and FDA standard for package integrity testing
• Vacuum Decay technology referenced in USP 1207 guidelines